Frigidaire Error Code SY EF : Easy And Quick Fix!

If you are also tired of malfunctioning the Frigidaire refrigerator, there is a chance that you may be experiencing an error code.

The most common error codes for Frigidaire refrigerators are SY EF, which stands for System Error. If you are experiencing one of these error codes, there is a good chance that your refrigerator is not working correctly and needs to be repaired or replaced.

You better check the causes that are making your frigidaire error code sy ef. Later, go on with the troubleshooting ideas. If you can’t fix this error code yet, consider going for technicians.

Why does my Frigidaire refrigerator say Sy EF?

The Frigidaire EF error message is a permanent fixture on many modern fridges. If your fridge doesn’t t have the EF error message, it probably has other issues.

Fridge error messages can be confusing, but Frigidaire’s EF stands for Error Free. So what does that mean, and why is it on my fridge? In a nutshell, if your fridge has the EF error message, the refrigerator’s internal computer has detected an issue with one of its electrical components. 

Depending on the nature of the problem, fixing it might require replacing parts or an entire assembly. But no matter what, getting EF to error-free status from your fridge is always a good thing!

What Does The SY EF Error Code Mean On A Frigidaire Refrigerator?

If your refrigerator is giving you an error code like SY-E-F, there could be a problem with one of its major components. This frigidaire error code means that the cooling system has failed and needs to be repaired or replaced. 

When the cooling system goes out, it can cause extensive damage to your food and even freezer burn. 

If you find some unusual bad smells coming from your refrigerator, or if the power goes out and doesn’t come back for a long time, call a qualified technician to check it out.

Some other common reasons that cause SY EF Error Code:

Frozen food – The refrigerator is not properly cooling or freezing, and the freezer unit is damaged.

Temperature sensor error – The temperature sensor has malfunctioned. Replace or repair the temperature sensor. If the refrigerator has a manual defrost system, there may be a problem with the temperature sensor.

No power – The power supply to the refrigerator has failed. Replace or repair the power cable.  

Defrost circuit error – The defrost cycle is not functioning properly. Replace or repair the defrost timer, receiver, and thermostat.

Frozen water line – A common cause of this problem is a frozen water line. When this line gets frozen, it causes the refrigerator to overheat and give the SY error code. 

Bad thermistor – The most common cause of this error code is a bad thermistor, which can be found in the refrigerator’s control board. The thermistor can be found on the left side of your refrigerator and is usually located at the top. 

How to restart the Frigidaire refrigerator? 

If your Frigidaire refrigerator is experiencing an SY EF error code, you need first to try restarting the fridge. This is the most common thing to fix an error code.  

To restart your refrigerator, follow these simple steps:

  • Open the freezer and remove any frozen food. 
  • Disconnect the refrigerator power cord from the back of the refrigerator. 3. Remove the ice dispenser cover.
  • Turn off all power to the refrigerator and wait five minutes.
  • Reconnect power to the refrigerator and wait an additional 10-15 minutes for it to stabilize before removing food again.

Troubleshoot frigidaire error code sy ef:

If you’re getting any error code on your Frigidaire refrigerator, there’s a good chance that you can fix it yourself. In this guide, we’ll show you how to troubleshoot common. 

Frigidaire Error Code SY EF : Easy And Quick Fix!

Frigidaire error codes help you get your appliance back in working order quickly. To troubleshoot your Frigidaire refrigerator, follow the steps below:

Power cycle your Frigidaire Refrigerator. This step is crucial in diagnosing your error code. First, unplug the refrigerator from the wall outlet. Then make sure that your Frigidaire is plugged into a working electrical outlet. After a few minutes, turn the power back on and let the appliance run for at least 10 minutes with no ice or food inside it. If your Frigidaire still does not power on, call for service.


Here are some tips on fixing the problem and getting your refrigerator back up and running again.

2. Turn off the power to your fridge and remove the back panel to check for any obvious problems. If the light bulb on the temperature control knob is burnt out, replace it. Check that you have a new one. If the temperature control knob is not turning or moves very slowly, you may need to replace it.

3. Open the refrigerator and check for any obvious problems. If it does not cool well, you may need to replace the compressor or fan.

4. Check that the temperature control knob turns freely when you press it down on the thermostat.

5. If the refrigerator is not frozen enough or not at the correct temperature, check that there are no obstructions in the condenser fan and make sure it is working.

6. Check that the temperature control dial turns freely on the thermostat. Check that the thermostat is working.

7. Check that the refrigerator is plugged into an outlet and has power.

8. If the temperature control dial moves slowly or not at all, you may need to replace it.

9. If the temperature control knob does not turn, you may need to replace it.

Frequently Asked Questions:

Where is the fan sensor on a Frigidaire refrigerator?

The fan sensor is located on the evaporator coil on the side of the refrigerator. This is a safety feature to keep the refrigerator from running on low or off if the temperature gets too high. If this sensor fails, it may go out of adjustment and cause the compressor to run constantly on and off. Depending on the age of your refrigerator, you may need to replace this sensor. 

Where is the condenser coil on a Frigidaire refrigerator?

A refrigerator’s condenser coil cools the refrigerator’s interior by transferring heat from the refrigerant to the surrounding air. The condenser coil is located behind and below the evaporator coils on most Frigidaire models. The condenser coils are composed of copper tubing encased in a plastic or rubber jacket. Depending on the model, condenser coils are available in different sizes and styles. The larger the condenser coil, the more effective it is at cooling. 

More error code problem we already solve at howtofixup you may like –

How To Fix 5d Error Code?

LG Dishwasher Error Code 1e

LG Dishwasher cl Code Turn Off

Whirlpool Washer Error Code e01 f01- The Ultimate Solution

Wrap Up: 

The frigidaire error code sy ef is a common problem when the refrigerator isn’t properly cooling or freezing food. The error code can signify that there is something wrong with the refrigerator, and it needs to be fixed. If you get an error code, there are some things you can do to try to fix it. First, try to know what are the things that are causing the error code. Later go on with the fixing issues. Also, try to follow all the tips to avoid such warnings in your refrigerator.

Leave a Comment

Your email address will not be published. Required fields are marked *