GE washer or General Electric washer is one of the gadgets which makes your washing task more convenient. The washer’s main purpose is to make your clothes clean and the washer does that by spinning. So, if your GE washer not spinning or agitating, then it might interrupt your washing task.
StoppaGE of spinning or agitating is one of the most common problems that can happen while operating a GE washer. The fault in the internal parts and damaGE in the door lock, water transmission, rotor or stator assembly, etc. are the reasons behind the spinning problem.
However, if you can sort out the reasons, prevent the problems and troubleshoot them properly as soon as those happen, your GE washer will last longer with efficiency
Reasons GE Washer not Spinning or Agitating
If you know the source of the problems and are aware of exactly why the GE washer is not spinning or agitating, you will be able to sort them out more quickly. So look for the following reasons in case your GE washer won’t spin or drain…
Loose drive belt
The drive belt is one of the most crucial parts of a GE washer and a loose drive belt can be the reason for your GE top load washer not spinning or agitating. Generally, the drive belt plays the core function in spinning the washer, so if it is damaged or loose for some reason, then your washer won’t be able to spin. The drive belt is seen loose on the pulleys most often.
Overloaded motor coupling
The motor and the water transmission of the water is needed to be connected to start spinning. And the connection is done by the motor coupling. If the washer is overloaded with clothes and other objects, the motor coupling will refuse to provide a connection in order to protect the water transmission and the motor. If this happens, the washer won’t spin.
Defective drive motor
You will rarely find the drive motor defective as a reason behind the GE washer not spinning or agitating. Still, it can happen and you should check whether the defectiveness is because of the absence of power or not.
Failure of the lid switch assembly
In case you forget to close the lid of the washer and start that, you will see that the washer is not spinning and only agitating. This happens due to the lid switch assembly because it prevents spinning if the lid is not closed properly. Sometimes you may also find the lid switch assembly is defective.
Faulty rotor assembly
For the tub within the washer to rotate, a strong electromagnetic field is needed to be generated. This electromagnetic field is largely produced by the interaction between the rotor and the stator. By any chance, if this magnet of the rotor is damaged, your GE washer won’t spin or rotate. So, the faulty rotor assembly is one of the reasons behind the washer not spinning.
Damaged Stator assembly
The function process of the rotor assembly and the stator assembly is almost the same. The only difference is that the stator assembly connects with the rotor. On The stator, there’s a thing called “windings”. If this is being damaged anyhow, the washer will stop spinning.
Flawed Door latch
Like the lid, you need to ensure the door of the washer is shut perfectly in order to start the tub spinning. if the door is not shut or secured properly, the spinning will stop and the washer will keep agitating. Generally, there is a door latch that secures this. So, GE washer not spinning or agitating can be caused because of a flawed door latch.
The problem in door lock
Sometimes, there are seen problems with the door lock and can be the reason behind the washers’ tube not spinning.
Burned out motor control board
Primarily, the motor control board supplies the washer with electric power, and then the washer can start spinning or functioning. Often, there occur functional problems in the motor control board like the burned-out components which resulted in not spinning or only agitating in the GE washer.
Sometimes, if there’s nothing wrong with the motor control board, your power-providing socket board can be the reason.
Fault in water Transmission
In a washers’ water transmission, there are gears in them that may be proven faulty or defective. If the gears in water transmission fail, the tub within the GE washer won’t spin or will just keep agitating. But in 90% of cases of the stoppaGE of spinning, this reason is least likely to happen. Still, this reason is mentioned for your information.
The solution to GE washer not spinning or agitating
The stoppaGE of spinning or just agitating of your GE washer is really troublesome when you are in a hurry to finish your washing task. Still, try to take some time and give proper attention to the following ways which might enable you to solve this “spinning” related problem.
Make sure there’s nothing wrong with the lid switch
- Open the lid so that you can check thoroughly and carefully.
- See whether the plastic tab attached to the lid switch is visible or not.
- Also, see if it can catch the switch lever when the lid is closed or not.
- If the lid can’t function accordingly, replace that before further damage.
Remove the clogged clothing
- Sometimes, the clogged-up or jammed clothing can stop the spinning. So look for clogged clothing into the drum and the cabinet.
- When you find any, remove them and make space for the drum for spinning.
Evenly place the laundry clothes
- Uneven or imbalance placement of clothes within the tub sometimes stops spinning. So place the laundry clothes evenly within the tub.
- Don’t just start the washer after putting clothes into the washer randomly.
- You can purchase a GE washer that comes with a safety option that prevents uneven placement.
Keep track of your washers’ cycle progress
- There’s a certain way through which your washer shifts. Keep track of this shifting cycle.
- Be aware of the time when you turn on the washer and it abruptly stops after a few seconds of spinning. This indicates malfunctioning.
- Try to consult with an expert at those times.
Maintain the proper condition of all the internal and external components
- As mentioned in the “reasons of GE washer not spinning or agitating” section, the spinning can stop because of the defective drive belt, faulty motor coupling, damaged drive motor, disconnection between rotor and stator, etc. So, ensure that those parts are in their optimum condition.
- You can ensure that either by consulting with an expert technician or just by replacing them.
- Confirm proper power supply and effective motor control board.
FAQ
Still got some questions in mind? Have a look at the section below.
Why does my washer agitate but not spin?
Sometimes, when you put your clothes into the washer, you come across a situation where the washer agitates but does not spin. Most often this happens because of a fault in the belt otherwise for a wrong code. If this happens, check if the belt is faulty or not. If the belt is alright, then try to unplug and plug the wire from the socket and make sure the washer is not overloaded.
Is there a reset button on GE washers?
If you do need to reset your GE washers, then first of all try to unplug the washer from the socket board for about 1-2 minutes and then plug it again. Then within 14-15 seconds, you should try to lift and lower the lid at least 6-7 times and turn on the switch. This is the process of restarting if your GE washer doesn’t come with an auto-restart button.
Conclusion
There always goes a saying that “prevention is better than cure”. This is also applicable while dealing with electric gadgets like GE washer. It’s better to prevent GE washer’s spinning-related problems than to troubleshoot them after happening.
The above article aims to provide you with the reasons which cause spinning problems or agitation and the ways to resolve them promptly. Hope all the confusion regarding “GE washer not spinning or agitating” will be cleared after going through the above description.
If your water transmission keeps getting stuck and the spinning keeps getting faulty even after trying all of the aforementioned methods, you had better replace the faulty parts to keep the GE washer in its optimum condition for a longer period.