It’s an annoying experience if you have a problem with your home’s busy washing machine. Because it was purchased to serve your family, but when it shuts down or has some other problem, it has to fall into a dilemma. If you are a Whirlpool washing machine user, you have to deal with many such issues. One of the problems of Whirlpool Washer is bypassing the lid lock. Most Whirlpool users quickly unplug the machine to fix it. But this is not the final solution.
Since the electrical connection is involved with this process, we have to work with caution. I will present the details of the lid lock bypass process here.
How to Avoid the Lid Lock on a Whirlpool Washer?
For most Whirlpool washing machines, lid lock technology exists. The lid lock technology helps to keep it closed while the washing machine is running. An electromagnetic connection is created between the solenoid and the trick by placing an isolated magnet. That makes the impression that the lid is open but closed. A few steps bypass this lid lock switch that can easily bypass the lid lock without any damage. Skipping the lid lock switch may invalidate the warranty facility. That would be great if you began with the subject in mind.
Turn of The Washing Machine, Then Unplug It From Wall:
Please turn off the washing machine and unplug it from the wall. Do not bypass the lid switch under any circumstances while the washing machine is on or with the power connected. That may cause you to suffer an electric shock. Disconnect from the main power cord if necessary for complete safety. After disconnecting the power cord, keep the electric line in a dry and safe place to not get wet or damaged by any other cause.
Turn off the washing machine and start working at least 10 to 15 minutes later. Otherwise, the hot machine will harm your body. Because the running machine is heat activated.
Trim Off The Water Supply by Rolling Off the Twin Valves:
The Whirlpool washing machine has a pair of water supply valves on the unit’s back or under the utility sink. In some machines, the valves are red and blue, indicating hot and cold water supply. Keep turning the valves clockwise to the left until the water supply is off. Avoid any mechanical alterations without turning off the water supply, and it is harmful.
Open The Washers Top Panel:
Find the hidden retention clip to disassemble the top panel of the washer. You will usually find retention clips on either side of the front of the unit. Insert one side of the housing with a screwdriver or a long thin knife and press hard against the clip. In this way, remove the rest of the pins and separate the top panel. However, some models have to follow a different procedure to disassemble the top panel. That is why you need to confirm the model of the washing machine before disassembling the top panel.
Identify Lid Lock Switch:
After opening the top panel, you will see a box made of plastic there. That is the lid lock switch that controls the locking activity of the washer. The lid lock switch box will have several wires attached by clips. There is no need to conflict with those wires to control locking activities. If you want to avoid extra work, leave the cables as they are.
Set A Magnet On The Section Where The Lid Hook Switch Fits The Washer Cabinet:
Place an isolated thin magnet at the bottom of the unit housing where the solenoid is located. The solenoid is an electromagnet power assembly. That’s why placing an interest here creates a robust electromagnetic connection, which indicates that the lid switch is closed even though it is open. Any magnet can do this, but you must use a suitable magnet to close the lid completely.
Not all washing machines have the same method of closing the lid. Some older washers keep the lid closed through a magnetic charge while working. Apply duct tape with a magnet to protect it from rapid corrosion and use it for a long time.
Now reattach the top panel and turn on the machine with an electrical connection to the washer. If the lid lock works appropriately during the washing cycle, then it must understand that the magnet has been placed in the right place. Remember, this will not interfere with the normal functioning of your machine. Moreover, it is helpful to do this so that the machine does not shut down repeatedly while washing. Be assured to turn on the water quantity valve during the testing activities.
It looks like the washing machine is running normally, but the lid is not closing completely. If so, it should understand that the magnet has not been placed in a suitable place. It would be best to put the interest in the top panel’s right place where the lid switch usually hangs. Before installing, make sure that the attractive face of the attraction is facing downwards. Because the downward magnetic face can create solid electromagnetic connections to the solenoid
If the current magnet fails to work as expected, use a more powerful magnet. If you can’t find a solid magnet to maintain the connection, unscrew one attached to the edge of the washer lid. In this way, re-add it at the end of each work.
Remove The Lid Lock Switch Assembly:
To remove the lid switch assembly, unscrew the two screws that hold the box attached to the top panel’s bottom with a nut driver. When opening the package, care should be taken so that there is no damage to the inner wires. If you use the right tools, you will not have to worry about opening the lid switch. Remove the screws from the top panel and place them in a place where you can find them quickly, and there is no chance of losing them. Arrange a small dish or something similar.
Remove the cover after opening the lid switch from the top panel. This cover is mainly used for the security of the retention clip. Pull the clips with your thumb to separate the pins. Now remove the lid and keep it in a dry and clean place. Some covers have small screws. In that case, use a screwdriver without dragging it to open it. Your negligence will cause damage. If necessary, get an idea of the structure of your washing machine from the guide book.
Scan Wiring Diagram To Determine Which Wires To Cut:
Each washing machine has a lid switch and a lock switch separately. Scan the wiring diagram to determine which one is related to the lid switch and which one is associated with the lock switch. If you have no concept about the wiring diagram, find out from the guidebook provided with the washing machine. Each company offers a guide with their washing machine. Most washing machine lid lock switches have 3 or 4 types of wires. The work and color of each cable are different.
When cutting it, notice how many wires are in your switch if three wires and the lid and lock switch are connected in positions 1 and 3, engraved on both sides of the middle wire.
Carefully cut the center of each wire with sharp scissors. Because, if there is any problem in cutting it, your washing machine may stop working correctly. You may also lose your warranty benefits. So without risking, it would be wise to call a whirlpool maintenance specialist. Cutting the wire will prevent it from making an intact connection and will keep the lid locked.
Keep twisting their exposed strands with your thumb and forefinger to attach the two wires. Once the pair is fully secured, attach a plastic connector to the junction for safety. You can use electronic tape instead of plastic if you want. The joints should be connected in such a way that the intersection is smooth. If the corner is not soft, it may leak and explode after a while. You regularly have to be concerned when it comes toelectrical work.
Reassemble The Washer And Try It Out:
Prepare to re-examine once all the work is done correctly. Re-insert the cover, press until it clicks. Reattach the lid switch to the top panel’s bottom and tighten the screws with the nut driver. Now, turn on the washer with an electrical connection. If your machine is working correctly and the lid switch is working correctly, you will know that you have succeeded. Now you can open the lid anytime during the washing cycle.
As mentioned earlier, each washing machine has a different technology in the model. Some lid lock models do not close automatically. Such is why you should be concerned enough. Also, keep your face, hair, jewelry, clothes away from the spinning agitator when the lid is open.
More on howtofixup
Finally, I want to ask you a question! Do you know what the function of the Whirlpool washing machine’s lid lock switch assembly is? If you read my above discussion seriously, you will be able to answer. My advice is that when you use an electronic machine, you should get an idea of that machine’s features. Whirlpool washing machine’s wiring diagram is related to lid lock bypass, so you need to know such things. Hopefully, you have now learned the lid lock bypass process. You can troubleshoot all such problems yourself.