The Kenmore Elite washer is one of the market’s most popular high-end washing machines. It has a wide variety of features and comes in multiple sizes to choose the perfect one for your home. However, like any other machine, there may be times when problems arise with your Kenmore Elite washer. The good thing is that there are several ways to troubleshoot these issues and get back up and running quickly.
This guide will cover resetting your control panel and checking for faulty wires or connectors in and around the machine that could cause it not to start or stop working during an operation cycle.
Reset before Starting a Wash Cycle
Some washing machines may need to be reset before starting a wash cycle. If you find that your Kenmore washing machine is not draining water or spinning, it could be because of a power outage. In this case, place the washer in a corner where it can drain and leave it plugged in overnight. A full cycle may need to be completed before the problem is fixed completely.
If this doesn’t work, try resetting the washing machine manually by pressing the reset button on the left side near where you plug in the electricity cord (this will vary depending on the model). Pressing this button will sometimes fix minor errors when using your washing machine, such as not draining properly or having difficulty opening after use.
Here is how you reset your Kenmore Elite washer
To begin, turn the power switch off and unplug it from its power source. Then, remove the rinse aid dispenser from the side of your washer and any other removable parts of your machine that may be in place. The next step involves pressing on three points inside the drum with a screwdriver or something similar: one at the bottom front corner of your machine and two in between that point and where you removed any removable parts (if applicable). You will know if you are doing these correctly because there will be an audible click sound when pressing each button after each press; this means that they are all resetting properly. Once all three have been pressed down and clicked back up again, replace everything inside of your machine before plugging it back into its power source.
Turn the Power Switch Off
Turn the power switch off and unplug the machine from its power source.
• Remove any clothing and other items inside your washer, then remove the lint filter at the front of your unit (usually underneath a plastic door).
• Locate a small screw at the top of your washer that holds down a cover over an access panel on top of your machine; remove this screw with a Phillips-head screwdriver so you can lift off this access panel, exposing another set of screws directly underneath where you removed that first one: these two sets of screws should be circled in red below:
Press the power button for 3 seconds, then release it.
The washer should start up again. If you want to be sure that it’s restarting properly, check that the lights are flashing in sequence on your control panel and that they are cycling through all the different cycles (wash/rinse/spin).
Related: Kenmore Washer Won’t Spin – Reasons and Solutions
If you don’t see the lights cycling through all of the cycles and they’re not flashing in sequence, your washer’s computer needs to reset. You can do this by disconnecting the power cord from the wall outlet for at least 30 seconds, then plugging it back in.
Plug your machine back in and turn on the power.
• Make sure you have the power cord plugged into a working outlet and flip the circuit breaker switch to turn it back on.
• Press start, select your preferred wash cycle, and start washing clothes again.
Make Sure You Check for Blockages.
. Check for blockages at the bottom of the machine if the washer still does not drain out.
1. Select the preferred wash cycle, then press the start button to begin the machine’s wash cycle.
• Allow your Kenmore Elite washing machine to complete a full cycle without interruption or interference from you. Do not press any buttons on your control panel during this time, as it may cause unexpected results or damage to your washer!
• Once your machine has finished its cycle, unplug it and allow it to cool down before removing any laundry inside of its drum (this could take up to 2 hours).
If your washer has a rinse cycle, complete it by pressing the “Rinse” once. This will allow you to remove any excess soap or detergent from your laundry. Once you have completed this step, unplug your machine.
Easy Way to Troubleshoot Any Problems
Resetting your Kenmore Elite washer is an easy way to troubleshoot any problems you might be having with it.
If you’re experiencing issues with your washing machine, the first thing many people do after checking for obvious issues like a clogged drain or poor water supply is reset the unit. This process isn’t difficult, but it requires you to know where all the buttons are located and what they do. After resetting your Kenmore Elite washer and waiting for several minutes, try running another load of laundry before calling in a technician if the problem persists.
If that doesn’t work out as planned, there’s still hope! All appliances break down eventually; however, most can easily be repaired at home using common household tools and supplies found around any house—including yours! That means you can also start fixing up some broken appliances in no time flat.
Troubleshoot Kenmore washer other problem also :
Kenmore washer stuck on sensing: What’s the real issue?
Kenmore Washer Lid Switch Bypass
F21 Error Code Kenmore Washer: The Meaning & Its Solution
Conclusion
Even though it might seem daunting, resetting your washer is simple. With the right tools and a little knowledge of what you’re doing, you’ll be able to fix your unit in no time! Hope this guide has been helpful for anyone who needs help with their Kenmore Elite washer.