Kenmore Elite Washer Code F20: Causes And Solutions

Laundry is hardly a fun thing to do. It is a chore that we just got to do. However, it can worsen when you face sudden issues with your washer. The Kenmore Elite washer is a reliable household appliance. But even the most advanced machines can experience problems. The F20 error code is just one of those issues faced by Kenmore users.

The Kenmore Elite washer code F20 is a standard error code on your washer’s control panel. The F20 error code is an indication that there is a problem with the water inlet system. To be more specific, it means that the washer is not getting enough water or that the water pressure is too low.

There can be various causes for the F20 error code, and you need to figure it out before finding a solution. In this article, we are going to discuss the possible causes of the F20 error code and how you can try to solve the problem.

Causes Of The Kenmore Elite Washer Code F20

Your Kenmore Elite washer can display the F20 error code for several reasons. The solution will differ depending on the cause. Thus, let us see what the possible causes of triggering the F20 error code are:

Low Water Pressure

Most of the time, the F20 error code occurs due to low water pressure in your washer. If your washer does not receive enough water, it can trigger the F20 error code. Low water pressure can be the result of various factors, such as problems with your home’s water supply or issues with your plumbing system.

Kenmore Elite Washer Code F20: Causes And Solutions

Clogged Inlet Screens

Sometimes the F20 error code is triggered because the inlet screens of your Kenmore Elite washer are clogged. The inlet screens are usually found at the back of your washer. They are designed to filter out debris and sediment from the water supply. However, over time, these screens can become clogged with buildup. This can restrict the flow of water into the washer and trigger the error code.

Faulty Water Valve

If the water pressure is adequate and the inlet screens are clean, then the F20 error code might be triggered due to a faulty water inlet valve in your washer. This valve is responsible for controlling the flow of water in your washer. If for some reason, this valve is not working correctly, it can restrict the flow of water, causing the F20 error code.

Kinked Or Damaged Hoses

There are some water inlet hoses that connect your Kenmore Elite washer to the water supply. Sometimes, these hoses can get kinked or damaged. If that happens, it can restrict the proper flow of water to your washer and, consequently, trigger an F20 error code.

Solutions To Fix The Kenmore Elite Washer Code F20

Once you have found the cause behind the F20 error code, now it is time to find a solution to fix the problem. Let us check out some potential solutions to the F2o error code:

Restore The Water Pressure

To deal with the F20 error code on your Kenmore Elite washer, the first thing you need to do is check the water pressure of your home’s water supply. If the water pressure seems too low, you can try fixing the problem by turning up the main water valve.

If there still seems to be a problem, you should also try to check for any types of leaks or clogs in your plumbing system that could be causing the low water pressure. Once you identify the problem, try to see if it can be repaired or replaced.

Clean The Inlet Screens

If the water pressure seems to be normal, the next step is to check the inlet screens found at the back of your Kenmore Elite washer. These screens can become clogged with debris and sediment over time, which can restrict the flow of water into the machine and trigger the F20 error code.

Thus, to fix the problem at hand, try cleaning the inlet screens. To clean the inlet screens, first, you need to turn off the water supply to your washer. Next, disconnect those hoses from the back of the machine. Now, just use a brush or toothbrush to scrub away any buildup on the screens.

Replace The Water Inlet Valve

If the F20 error code is still on display even after cleaning the inlet screens, the next step is to check the water inlet valve. A faulty water valve can trigger the F20 error code. In this case, you will need to replace the valve to fix the issue. 

However, replacing a part of a washer is not an easy feat. This is a job best left to a professional, as it involves working with electrical connections and water lines.

Check The Hoses

If none of the solutions given so far has worked, the last thing you can do is check the hoses connecting your washer to the water supply. Check the water inlet hoses for any kind of kinks, damage, or blockages. If you find any issues or damages, you may need to replace the hoses to ensure proper water flow to your Kenmore Elite washer.

Again, we must remind you that replacing a part of a washer is not an easy feat. This is a job best left to a professional, as it involves working with electrical connections and water lines.

Some other Kenmore Elite washer error code problems and solutions we’ve already discussed at our website you may like:

Kenmore Elite Washer IE Code: Troubleshooting And Solutions

Kenmore Elite Washer Error Code F35

Kenmore Elite Washer CL Code: Causes and Solutions

Final Words

It is never a fun experience when your daily appliances malfunction. Getting an F20 error code on your Kenmore elite washer is one such frustrating occurrence. However, as with most problems, there is always a solution.

In this article, we have discussed the possible causes and potential solutions to fix the issue of F20 error code. However, if these solutions do not seem to work, or if, at any point in time, you feel unsafe or uncertain about what you are doing, it is always recommended to consult a professional to get expert help or advice.

Leave a Comment

Your email address will not be published. Required fields are marked *