Kenmore Elite Washer IE Code: Troubleshooting And Solutions

The Kenmore Elite washer is a reliable and widely-used household appliance. It is known for its efficiency and longevity. However, even the most durable and dependable machines can face issues from time to time. One common issue Kenmore Elite washer owners face is the IE error code. 

The IE code is often the indication of an issue with the water inlet valve or water supply. If not fixed, it can get pretty troublesome. However, the good news is that there are several steps that you can take to troubleshoot and fix the problem.

In this article, we are going to discuss them in detail. After reading the article, we hope you will be able to figure out what is wrong with your Kenmore Elite washer and find the solution required to fix the issue you are facing.

Step By Step Guideline For Troubleshooting And Fixing The IE Error Code

If you own a Kenmore Elite washer, you might have encountered the IE error code on the display panel. The IE code typically indicates a problem with the water inlet valve or the water supply. 

Kenmore Elite Washer IE Code

Now we are going to discuss some troubleshooting steps to fix the IE error code and bring your Kenmore Elite washer to its fully functional state.

Step 1: Check The Water Supply

The first step in troubleshooting the IE error code on your Kenmore Elite washer is to check the water supply. This step can be pretty crucial because this is the step where you can determine whether the error code is caused by a problem with the water supply itself or a malfunction in the washing machine.

Begin this step by ensuring your water supply is properly turned on and the water valves are fully open. If you have recently moved or had plumbing work done, it’s possible that your water supply may have been turned off. This can cause the IE error code to be displayed.

Now, you need to check the water supply hose and make sure that it’s not kinked or blocked in any way. Remember to check for any debris or sediment in the water supply hose or valve. Accumulated sediment in the water supply line can lead to a restricted water flow and ultimately trigger the IE error code.

If you notice any debris or sediment, clean the hose and valve thoroughly. You can do this by disconnecting the hose from the washing machine and using a stiff brush or a cloth to clean the inside of the hose and valve.

If doing all these do not resolve the IE error code issue, then it’s time to move on to Step 2 and continue with the troubleshooting process.

Step 2: Check The Water Inlet Valve

The next step involves checking the water inlet valve. This valve is responsible for controlling the water flow in your Kenmore Elite washer. If this valve gets blocked or does not seem to be working for some reason, you may face an IE error code issue.

Anyway, in order to check the water inlet valve, you will need to disconnect your washer from the power source and turn off the water supply. Next, you need to remove the hoses from the water inlet valve and inspect the valve for any visible signs of damage or debris. 

If any damage or debris is noticeable, you may need to replace the water inlet valve. If no damage is found and the valve appears to be working properly, use a multimeter to test the valve for continuity. If there is no continuity, you will need to replace the water inlet valve.

However, if this step does not solve the IE error code situation, consider trying the next step.

Step 3: Check The Water Pressure

Sometimes, low water pressure in your Kenmore Elite washer can be the cause of an IE error code. Therefore, make sure that you have the proper water pressure to continue using your washer smoothly as well as to avoid getting error codes.

Anyway, if the water pressure is too low, you may need to contact your local water authority to check if there are any issues with the water supply in your area. Alternatively, you can also install a booster pump to increase your water pressure.

Step 4: Check The Water Level Sensor

If none of the above-mentioned steps do the trick, then the only thing you can do now is to check the water level sensor. The water level sensor is responsible for detecting the water level of your washer and has the possibility of triggering an IE error code.

However, first, you need to locate the sensor inside the washer. Most generally, the sensor can be located near the top of the back panel of your washer. Once it has been located, carefully disconnect the wiring harness from the sensor. Now, use a multimeter to test the continuity of the sensor.

If the water level sensor is working correctly yet still displaying the IE error code, check the air dome tube for any obstructions. If you find any obstructions or damage, clean or repair it. However, if there is no continuity of the sensor, you will need to replace the water level sensor.

Although it is important to remind you that replacing the water level sensor can be a pretty challenging task. So if you do not feel comfortable or safe doing it yourself, it’s best to contact a professional technician.

Related:

Kenmore Elite Washer CL Code: Causes and Solutions

Kenmore Elite Washer Error Code F35

Final Words

Even a minor problem with daily appliances can be pretty frustrating. The IE error code is no different. In the article, we have discussed some steps that you can follow to troubleshoot and fix the issue. 

However, no matter how simple the steps sound, troubleshooting and repairing jobs can be pretty tricky sometimes. Therefore, if you feel unsafe or uncomfortable at any point, it is recommended to consult a professional. After all, they are the ones with the experience and expertise to recognize the problem and find the perfect solution. 

Leave a Comment

Your email address will not be published. Required fields are marked *