Sun Joe Pressure Washer Red Light on Plug

Sometimes a user can find that the Sun Joe pressure washer has a red light on the plug. Most of the pressure washer comes with an advanced technology called GFCI(Ground-fault circuit interrupter). This GFCI is responsible for having the red light on the plug. 

However, the Sun Joe pressure washer red light on the plug indicates something wrong. You may press the GFCI reset button to resolve this problem. But, this problem will come back again and again if you can’t identify the core reason behind it.

A red light on GFCI may indicate its end, requires a general reset, or the tripped situation. Your headache must start when the regular green or black light turns red. So, let’s know the reasons behind the existing red light and then get your hands to dispel it. 

Why is the Sun Joe pressure washer red light on plug?

The red light on the plug prevails for a long time- that means the plug needs your attention. Find out the possible reasons for the Sun Joe pressure washer red light on plug from below.

Ground fault issue

A ground fault is indirectly responsible for the red light on the pressure washer plug. The outlet tripping happens for this ground fault issue often. And the red light turns on when it’s a tripping fact. 

Outlet tripping for bad wiring

As we have mentioned earlier, ground fault issues are one of the main reasons for outlet tripping. But, bad wiring is also a core reason for outlet tripping. People may change the outlet again and again. But, it won’t create any positive impact due to bad wiring. 

Circuit overloading

GFCI will trip if a circuit gets overloaded. This tripping happens to save the outlet from extremely produced heat. The most familiar reason for circuit overloading is connecting too many appliances in the same circuit. Or, a faulty electrical device can create this kind of situation. When it’s a circuit overloading fact, the red light arrives at the Sun Joe pressure washer plug. 

Worn out GFCI outlet

No electrical or electronics component is manufactured to use forever. Therefore, a GFCI outlet can turn bad. The red light on the pressure washer plug is an uncommon incident due to worn-out GFCI outlets. But, it is possible and happens due to some critical situations. 

How to solve Sun Joe pressure washer red light on plug?

So, you have a minimum idea now on Sun Joe pressure washer red light. Now come to the point of the solution. You need not replace the plug first. At least, try to resolve before purchasing a new one.

If it’s a red flashing light, then you need to follow the steps depicted below.

1. Check the affected GFCI outlet. Most of the outlets have both “TEST” and “RESET” buttons. First, of all, understand that if both of them are required to press.
2. Unplug the connections of all the appliances from the dealing outlet.
3. Push the button with the highest care and wait a few minutes.
4. Then, check the outlet again. Hopefully, you may have found this process helpful.

What if your GFCI won’t reset? You have to follow these steps to resolve the problem.

1. Find out the “TEST” button first. Then, push the “RESET” marked button if it’s mandatory.
2. The red light will be removed if the tripping issue gets solved. So, you need to dry the GFCI using a conventional hairdryer. It will remove if there is any moisture present.
3. Then, check the main fuse where GFCI is connected. If it’s wasted, repair it or replace it. Then, you can reset the GFCI and get back the regular green or black light on the plug. 

If any of these efforts don’t bring you success, then you only have one way. Your GFCI is dead and you have to exchange it immediately. Hence, the red light on your Sun Joe pressure washer plug will disappear. 

FAQ

Having some questions about the red light of the Sun Joe pressure washer plug? This section will satisfy you with some relevant straight answers. 

What does a red light on a GFCI outlet mean?

A red light on a GFCI outlet means that it needs some extra care or something else. The red light on the pressure washer plug may be the indicator of resetting it. But, the continuous blinking of the red light may be a warning to purchase a new one.

Is the red light on the pressure washer plug bad?

People think that the red light on the pressure washer plug is always bad. Except for a blinking red light, all other warnings are less intense. However, those warnings aren’t ignorable anyhow. A blinking light on your pressure washer expresses most often that your GFCI plug is wasted.

Is the ground fault responsible for the red light on the plug?

A normal indicator-type red light may exist on the pressure washer plug. Most probably, this indicating red light exists due to tripping the circuit. And the ground fault causes the tripping most of the time. Bad wiring is the creator of the ground fault. Therefore, the ground fault can be responsible for this inconvenience.

More Sun Joe pressure washer repair related article at howtofixup

Sun Joe pressure washer GFCI won’t reset – Possible reasons with solutions

Why Is Your Sun Joe Pressure Washer Soap Not Working?

Sun Joe Pressure Washer Troubleshooting

Final words

A red light on the pressure washer is a kind of warning. It’s a part of the GFCI protection feature. The solid or blinking red light on the indicator says about a potential problem. If the GFCI reset won’t resolve the issue, the problem must be with the circuit or somewhere else. And then your concern about the Sun Joe pressure washer red light on plug starts.

Now, you have achieved some clear ideas about resolving the red light issue. You have the solution if it’s a tripping issue or just a reset instruction. All you need to do, assume the topic of the problem and fix it. However, you don’t need to hire an expert to do this. Perhaps, you can solve this red light issue on your own.