Sun Joe pressure washer soap is quite popular for providing better cleansing with good speed. This tool is perfect for people who are searching for some reasonable working handy tool.
This is easy to use, a budget-friendly option that works with higher electric CU. The power and performance can get you medium level cleansing.
Regarding all these features and facts, the Sun Joe pressure washer is known as one of the best all-purpose cleaners in the market.
However, sometimes people complain over sun joe pressure washer soap not working. For dealing with the issue, firstly, you have to know what the reasons are and what you are exactly missing.
Why Is Your Sun Joe Pressure Washer Soap Not Working?
Well, there could be many reasons behind your Sun Joe pressure washer malfunctioning. Before you want to know the troubleshooting ideas, you must know what the things that can create such issues are.
Here, you’ll receive some possible reasons that can interrupt your Sun Joe pressure washer soap working. Give a check here:
Broken injector Kit:
Every pressure washer has its soap injector system. This system works for injecting soap and solutions.
The Sun Joe pressure washer has cranial spring, injector, o ring, and other essential components in one kit. If the tool is creating an issue, check on the components.
Any broken part can interrupt washer pressure work.
Unsuitable soap solution:
Sun joe washer pressure requires a particular type of soap solution. This soap solution should be comparatively thicker in texture and free from any toxic chemicals.
If you use any wrong type of soap dispenser, it will create an issue with your sun joe pressure washer working.
Detergent tank issue:
The detergent tank is used for holding the soap dispenser. If your tool detergent tank is damaged/ broken, it will cause trouble while using the tool.
If you use any improper soap mixture, it gets stuck on the tank and creates a blockage. This type of blockage can create an issue with your washer pressure soap working properly.
Dysfunctional component:
You must check on the other components of the washer pressure as siphon tube nozzle/ sprayer and other vital parts of the sun joe washer pressure.
For uninterrupted pressure washer soap cleansing, make sure you’re using the high-quality siphon tube and actively working nozzle.
The wrong size, broken parts will stand as a thread for your washer pressure.
Extreme pressure:
Any kind of heavy pressure will interrupt Sun joe pressure washer cleansing. For avoiding such dysfunction, make sure you’re using the tool on its correct balance. For that, you must know what the proper power is.
If you forcefully push some extra pressure, the tool can create leakages, damaging the injection system.
How to make Sun Joe Pressure Washer Soap work correctly?
Sun Joe Pressure washer new savior for people who are looking for a cleaner in their home. You can work with this in your garden as well as indoor areas.
This pressure washer will work effectively with soap. However, sometimes, your lack of knowledge can create obstacles while using sun joe pressure washer soap working correctly. Here we’ve already discussed the probable issues.
Now, we can talk about the solution here. If you experience any mess while using your sun joe washer pressure soap dispenser, take a pause here.
Give a check on the tips here, and you should try to make the tool work correctly.
Use the suitable Soap dispenser:
You need to use the right type and kind of soap dispenser to make the tool work correctly. Well, a thicker texture can create clogs on the tank.
So, it would help if you found a brand of soap that works exceptionally nice and safe with your sun joe pressure washer.
Well, you must make sure that the soap is free from any toxic ingredients. Besides, the soap solution must include 80% water and the rest 20% soap. Also, you need to maintain the recommended instructions of the detergent soap bottle.
Here you can use an all-purpose cleaning detergent that includes Trisodium phosphate. TSP can stand as a good option as a safe option.
If you want to mix detergent, then it is also possible. Just pour some water into the detergent reservoir. Then you can mix the required amount of water and start cleaning the surface.
Use the Right pressure:
Only using the proper soap dispenser is not enough. You should also maintain the right pressure of the tool. For that, you have to learn the exact required power.
When you’re using a detergent, you have to maintain low pressure. Any excess power will create leakage or breakage with the nozzle. This will create a mess on the surface instead of cleaning it.
Is it safe to put bleach in our Sun Joe pressure washer?
No, it’s never safe using bleach with a sun joe pressure washer. Bleach is known as an excellent component that fights mold, bacteria, and mildew.
But, when you’re using it on a pressure washer, this will affect the tool as a dangerous toxic component. Your washer pressure will not only start malfunctioning, but also, this can get completely useless. Besides, using bleach on plants and grasses will kill them.
The strong chemical reaction of bleach will increase your maintenance cost. So, you must avoid using bleach into the pressure washer.
However, if you feel any importance of using bleach over your targeted surface, you can try scrubbing. Scrubbing bleach will minimize the risk of spraying it all over the surface.
Frequently Asked Question
Question: How do I use soap in my sun Joe pressure washer?
Answer: Using soap in a sun joe pressure washer is easy. You have to grab your favorite cleaner and pour it into the detergent tank, then plug the tool, attach the suitable nozzle and start cleaning the pressure washer.
Question: Is it worth buying a pressure washer?
Answer: A pressure washer will incredibly change the cleaning job in fun. This will make the task easier, save your time and energy. If you’re searching for some industrial and smart choice, a pressure washer will stand as a good investment.
More relevant article on pressure washer repair issues at howtofixup
What Kind of Soap Can I Use in My Pressure Washer?
Sun Joe Pressure Washer Troubleshooting
Greenworks Pressure Washer Troubleshooting
Conclusion
The pressure washer can cut off half of your tiring hassle with cleansing. Moreover, when you’re sun joe pressure washer cleansing gets fun. However, people sometimes experience sun joe pressure washer soap not working. There are several reasons and easy fixing solutions to the issue. This article has mentioned them all in detail. You can follow the instructions and get some great experience with your sun joe pressure washer.
It won’t wont even dis
pense anything
Thank You Melinda. Happy To Hear You.
If there is no detergent coming out, or won’t dispense anything then you have to check the following-
Ensure that the container of detergent is full.
Thoroughly check all the connections, if the detergent is too thickly diluted. Then you have to ensure that the adjustable nozzle is set in the low pressure. As if it is in high pressure mode, it will not allow detergent to pass.
And if you have done all these things, in the detergent function and if it is still not working, then the detergent suction tube or pump could be clogged. Or what can also happen is that the detergent tube has come loose from the pump.
To determine if the detergent is working or not, turn on the unit, and then put your fingers at the very end of the detergent suction tube. And if there is no suction at all it means that the tube has become loose. Then it is wise for you to call the customer service or the professionals who can help solve this.
But if you can feel the suction then it is working. And means it is just clogged. You have to remove the clogs from it.
Process of removing the clogs-
For removing the clogs, first you have to remove the wands from the gun.
Fill the detergent solution reservoir with some warm water
Then restart the pressure washer under the low pressure setting
Siphon until the water is gone, as this will remove the remaining chemical from the reservoir inside.
Repeat the process, then reconnect the adjustable nozzle to the end of the gun and set the nozzle at the low pressure position. Then you can begin the normal operations as usual.
Brand New _ The pump will not suck at all. No kinks. used diluted soap from sunjoe. I PUT FINGER INFRONT of hose to feel for suction…..nothing. Just put it together today. Help.
I apologize for the inconvenience you’re facing with your brand new Sun Joe Pressure Washer. If the pump is not creating any suction and you have already checked for kinks in the hose, there could be a few reasons for this issue:
Airlock: Sometimes, air can get trapped in the pump, preventing it from priming properly. To fix this, try the following steps:
a. Turn off the pressure washer.
b. Disconnect the hose and trigger gun from the pump.
c. Turn on the pressure washer for a few seconds to release any trapped air.
d. Turn off the pressure washer again.
e. Reconnect the hose and trigger gun, making sure they are tightly secured.
f. Turn on the pressure washer and try to use it again.
Water supply: Ensure that the water supply is sufficient and the hose is connected securely to both the pressure washer and the water source. Insufficient water flow can cause the pump to lose suction.
Detergent application: If you are using a detergent with the pressure washer, make sure you are using the correct detergent nozzle and that the detergent suction tube is properly connected to the pump.
Inlet filter: Check if the inlet filter (located where the hose connects to the pressure washer) is clean and not clogged. Clean it if necessary.
Pressure washer assembly: Double-check that all parts of the pressure washer are assembled correctly, as per the manufacturer’s instructions.
If you have tried the above steps and the problem persists, it might be a defect in the pump itself. Since your pressure washer is brand new, I recommend reaching out to Sun Joe’s customer support for assistance. They should be able to help troubleshoot the issue further or provide you with a replacement if needed.
Always remember to follow the safety guidelines and instructions provided in the user manual while operating the pressure washer. I hope this helps, and your pressure washer gets up and running smoothly!
Same issue here. It would dispense soap the first few times, but won’t anymore. It won’t even suck up water. No suction from the nozzle, even to it apart. No clogs. Any suggestions or replacements?
If your Sun Joe Pressure Washer is no longer dispensing soap and not sucking up water, even after ensuring there are no clogs and proper assembly, here are some additional suggestions:
Check detergent concentration: Make sure the detergent you are using is properly diluted according to the manufacturer’s instructions. Using overly concentrated soap can cause issues with the soap dispenser.
Soap nozzle or setting: Verify that you are using the correct soap nozzle or setting for dispensing detergent. Some pressure washers have specific nozzles or settings for soap application.
Check the soap suction tube: Disconnect the soap suction tube from the detergent container and check if it is clear of any obstructions or blockages. Clean it thoroughly if needed.
Prime the pump: Try priming the pump again to ensure it is free from airlocks. Turn off the pressure washer, disconnect the hose, and trigger gun. Turn on the pressure washer for a few seconds, then turn it off again. Reconnect the hose and trigger gun, making sure they are tightly secured, and try using the pressure washer again.
Water supply pressure: Ensure that your water source is providing adequate water pressure to the pressure washer. Insufficient water pressure can lead to the pump not drawing in water properly.
Check for leaks: Inspect all hose connections and fittings for any leaks that might be causing a loss of suction. Even a small leak can affect the pressure washer’s performance.
If you have tried all these steps and the issue still persists, it’s possible that there could be a problem with the pump itself. In such cases, it may be best to contact Sun Joe’s customer support for further assistance or inquire about possible replacements, especially if the unit is still under warranty.
As always, follow the safety guidelines and instructions provided in the user manual while troubleshooting or using the pressure washer. I hope these suggestions help you get your pressure washer back to working condition.
the sun joe detergent injector is easily clogged when you put it way with some detergent still in the little hoses. it will flow downhill to the injector as it dries out in the injector, building up residue inside the injector. it’s difficult to work on this until you completely remove the pump motor combo from the unit. The injector was plugged up with crud on mine. I cleaned it out and now it barely sucks any detergent, so I bought a gas pressure washer.
Thank you for sharing your experience with the Sun Joe detergent injector. It appears that the detergent injector can be prone to clogging, especially if there is leftover detergent in the hoses when the unit is stored. The residue buildup inside the injector can obstruct the flow of detergent, leading to reduced suction and performance issues.
It’s unfortunate that cleaning the injector didn’t fully resolve the problem, and I understand why you decided to purchase a gas pressure washer instead. Gas pressure washers can offer more power and may have a different detergent application system that might be more reliable for your needs.
If you encounter any issues or have questions about your new gas pressure washer or anything else, feel free to ask. I’m here to help with any information or assistance you may need.