Which side is hot and cold on the washer hookup? : Install it Right

You need to know many things about your washing machine before using it.

Washing machines can be a bit of a pain to hook up. If your machine is on the hot side, it can take longer to wash than on the cold side. And if your machine is on the chilly side, it may not get your clothes as clean as if you were washing them in hot water. Which side should you put your clothes on?

Some people believe that the side of the washing machine that the clothes are hung on is hot and the other side is cold. Others say it doesn’t matter which side is hot or cold, as long as the water is at a consistent temperature.  

To clear up all the confusion and use the washer hookup right, try to know more about its use.

Is there a difference between hot and cold washing machine hoses?

There are two types of hoses used with washing machines. One is called a “hot-water hose”, and the other is called a “cold-water hose”. They’re both made from rubber, but they have different purposes. 

Hot-water hoses are used to transfer hot water from the tank into the machine, while cold-water hoses are designed to keep the water cool as it travels through the hose.

In most cases, the manufacturer does not specify what kind of hose should be used with their appliance.

The hose is the same, and it’s just that one is heated by the water in the tank (hot) while the other is cooled by air outside of the tank (cold). The heating/cooling effect on the hose is negligible, so that you can use either type.

The only reason to choose any certain one will be if your washer has an option for “warm” or “cold” cycles. If this is the case, you’d want to use the warm cycle since it will heat the water inside the tank, making your clothes feel more generous when they come out.

Which side is hot and cold on the washer hookup? 

Most people would say that the side of the washer with the water and detergent is hot, while the side with the clothes is cold. But is this true? According to a recent study, it’s not as simple as that. In fact, both sides of the washer are equally hot and cold!

The hot side is the bottom of the machine. This is where the water comes in contact with the spinning drum. The cold side is the top of the machine, where the clothes are put.

The best way to determine if the washer is using heating or cooling is to look at the control panel inside the washer. If there are two dials with numbers on them, one showing “heat” and one showing “cool”, the washer operates like a heater/drier.

Generally speaking, putting clothes on the cold side will cool them down faster than putting them on the hot side.

In order to avoid having clothes that are too cold, you should be able to put them on the hot side and not have them freeze. Alternatively, you can put them on the chilly side, but keep in mind that they will cool off faster.

How To Install A Washing Machine Hook Up?

Step 1: Turn Off Power Switch

First, you must turn off the power switch located at the top right corner of your washing machine. The popular method to do this is by pressing and holding down the power button until the lights go out.

Step 2: Open the Door Of the Washer

Next, you must open the door of your washer. In order to do this, you must remove the cover plate located at the bottom front of your washing machine. There you’ll see a small hole near the center of the cover plate. Make sure to insert a screwdriver through this hole and lift the cover plate.

Which side is hot and cold on the washer hookup?

Related: Maytag Maxima Washer Door Locked: 4 Steps To Unlock The Washer Door

Whirlpool Washer Door Locked Light Flashing

Step 3: Find Hoses Connected To Your Washer

Once you have removed the cover plate, you will notice two hoses attached to the back of your washer. These hoses are the cold water inlet and the hot water inlet, respectively. You must now find them and attach them to your faucet’s cold and hot water pipes.

Step 4: Attach Cold And Hot Water Pipes From Faucet

After finding the cold and hot water inlets, you must now attach the cold and hot pipes from your faucet by using the appropriate fittings. 

Relevant: Portable Dishwasher Faucet Adapter Doesn’t Fit?

For example, if your faucet uses a compression fitting, you will use a compression fitting to attach the cold or hot pipes. On the other hand, if your faucets use a threaded connection, you will use a threaded coupling to connect the cold and hot pipes.

Step 5: Test Connection

After completing step four, you must test whether everything is working correctly. You must fill the tub with water and check if the water flows smoothly. If there are any leaks, you must fix them immediately.

If everything seems fine, you can proceed with the rest of the steps.

Step 6: Close the Door Of the Washer

Now that you have completed step five, you must close the door of your washing machines. Once this has been done, press and hold the power button for about 10 seconds. This will turn the power back on and allow you to operate your washing machine.

Frequently Asked Questions:

Can you use a washing machine with just cold water?

The short answer is yes, but you may need to add a little bit of hot water to get the best results. You can use cold water washing machines on a low heat setting if your water is between 68 and 104 degrees Fahrenheit. Also, there have a few additional tips you need to maintain to clean your machine.

Can you connect the washing machine to hot water only?

If your washing machine only has access to cold water, you can connect it to a water heater and use the hot water. This is a common workaround for older devices that don’t have an automatic shut-off valve for the cold water line. You should always check your washing machine’s owner’s manual to ensure this connection is allowed and safe.

Wrap Up:

People have a lot of confusion regarding washer hookups. Some people believe that the hot side is hotter, and others believe that the cold side is colder. However, the truth is that neither side is really any more desirable or colder than the other. It’s often just a matter of personal preferences. To maintain and understand the washer better, you must install it properly. Try following the mentioned steps here. You can also grab professional help. 

Leave a Comment

Your email address will not be published.