Whirlpool Washer Door Locked Light Flashing

Some unwanted facts like technical malfunctioning may lock your Whirlpool washer door. This revolting situation can make you worry about the stucked clothes inside the washer. Besides, you must feel worried about reopening the washer door.

When the door gets locked, a light keeps flashing. Being ignorant of this issue, you may fluctuate about your responsibility. Without knowing the right moves, you may damage the washer. Today, we will elaborate on the Whirlpool washer door locked light flashing. 

This article will help you to know the reasons behind the light flashing. However, we will specify for both front & top-loading versions. Our detailed writing is to show the way of solving it as well. Here we start our words.

What causes the Whirlpool washer door locked light flashing?

The reasons lying behind the washer door locked light flashing vary according to the model. We are upholding the reasons for both top-loading & front-loading washers.

Whirlpool Washer Door Locked Light Flashing

For top-loading washer 

Wrong striker alignment 

The lid switch performs according to the striker. A wrong alignment of the striker can lock the washer door. As a result, the locked light may flash constantly. 

Faulty control board 

A faulty control board is unable to detect the condition of the lid. This issue can lock the washer door for a bit. However, it’s possible to occur due to a momentary voltage loss. 

Damaged actuator motor 

The wires connected to the motor may damage & it makes the washer door locked. Besides, a damaged actuator motor can do it. 

Clogged filter drain

There may be any debris or something hindering safe draining. This situation will lock the washer door & keep the flash blinking. 

For front-loading washer

Damaged water supply 

If the water supply is shut off, the washer door will be locked & the light will flash. It may occur due to moving or repairing.

Debris in the drain pump 

The presence of debris clogs the drain pump. As a result, it forces the washer door to be locked. 

Malfunctioning door switch 

The wrong engagement of the door switch with the lock assembly can create problems. This malfunctioning flashes the closed-door light.

 Inappropriate assembly

If your motor buzz for a while & again stops, then maybe the topic is the wrong assembly. Speed sensor will ensure that the problem is with the assembly.

How to solve it?

We will speak on the Whirlpool washer door locked light flashing issue eradicating process. Keep scrolling down to get the exact solution.

Unlocking top-loading washer doors 

Step:1

There is a “CANCEL” button for most of the whirlpool washer models. Try to resolve the door opening problem by pressing it at first. If it doesn’t work, unplug the machine & try to get your desired result. After trying that, you should move for the manual way if the result is unsatisfactory.

Step:2 

Turn the water supply off. Don’t forget to plug out the washer before the initiative.  

Step:3

Find the cover to the drain pump. Access to the cover using a screwdriver. There will be just one screw & you can access the machine after its removal. 

Step:4

After getting access to the aimed compartment, a plastic cord will be visible. Hold that cord to pull mightily. However, this may open the Whirlpool locked washer door instantly.

Unlocking front-loading washer doors

Step:1

Unplug the washer for a short time. After plugging in, try to open the door. If this way doesn’t open the door, then move forward. You have to follow the manual method.

Step:2

Again, unplug the machine & determine the screws of the back-top panel. Take a screw-driver & remove all of that. Then, you can easily take off the back panel.

Step:3

After that, you will have access to the front panel of the washer. Get there & search for the door lock assembly. 

Step:4

After finding the lock assembly, observe it deeply. You can notice a small plastic-built globoid tab perhaps at the tootsie of the lock. Simply pull down it & wait to see the door to be opened. Moreover, the light flashing will be stopped then. 

What should do to prevent Whirlpool washer door locked light flashing?

You can’t avoid the technical unwanted issues whatever. But, you can take some steps to prevent flashing the Whirlpool washer door after locking. Here you get our suggestions.

  • Check the control board before connecting the washer. It will effectively help from happening awkward problems like door locking.
  • Motorize the motor regularly. If you find something unusual, think about calling an expert. You may need to change it possibly. 
  • Keep the drain from clogging by the dust. The washer door often locks for not getting the safe departure of the debris.
  • Assemble the whole system properly. Follow the user manual for an effective output.
  • Changing the voltage continuously is dangerous for the stability of the washer. Somehow, it is possible to be locked the washer door & flashing the light for the voltage changing. So, get a stable electricity connection if the problem is with the voltage.

FAQ

Here we are upholding the answers to some common questions.

Why is my Whirlpool washer door lock flashing?

This problem can occur if the problem is with the actuator motor. Loose wires of the motor also may become responsible for this reason. In this circumstance, it’s mandatory to check the motor & replace it immediately if it is needed.

How do I reset the lid lock on my Whirlpool washer?

Press the button and hold it for around 20-25 seconds & it will reset the Whirlpool washer. Don’t make a wrong press or a short press to the button. After that, a new setting will appear. You will find the lid lock lighting when settings are changed.

Why is my lid lock light flashing on the Maytag washer?

The lid lock light on the Maytag washer keeps flashing if the lid lock isn’t activated accurately. Besides, the lid may not close completely due to thrusting. Some of the conventional models get locked instantly. But, the rest gets locked after the wash cycle has started.

More on howtofixup

How to Fix Whirlpool Washer Sensing Light Flashing
How to Bypass the Lid Lock on a Whirlpool Washer
Whirlpool Washer Not Draining Completely?
How to Get Socks Out of Top Loading Washing Machine
My Washer Won’t Agitate but Spins

Conclusion

At the termination of this article, we are expecting the reader’s gratification. Wasn’t our article helpful on Whirlpool washer door locked light flashing? We hope our readers have understood the reasons behind the blinking light after the washer door lock. Whirlpool washer holders with similar kinds of problems can collect much knowledge to do some primary action.

Our objective was to make you familiar with the solving process of this problem. Hence, we have delivered our message to do it practically. Along with doing this, we have shown some ideas to prevent the problem. By following the ways, you can effectively avoid the problem of the washer lock door. We hope you have read the article carefully to get rid of this annoying problem.

Leave a Comment

Your email address will not be published. Required fields are marked *