Why Does the GE Dishwasher Start Button Not Working? : How to fix it?

The GE Dishwasher Start Button is a safety feature that helps prevent accidental starts. The button will automatically start the wash cycle if the dishwasher is left unattended. The button consists of a flashing red light. Sometimes you might notice the button is not working. 

If the button isn’t working, something may block the water from getting to the motor. To check if the button is working, turn off the power to the dishwasher and see if the light above it is on. 

If it’s not on, there may be a problem with the cord or with one of the buttons on the control panel. In either case, you better take care of repairs or replace parts as needed.

There can be many other reasons why the GE dishwasher start button is not working. Before you make any decision, try to know about those. And then you can jump on the fixing hacks.

What is the GE Dishwasher Start Button?

The GE dishwasher start button has been frustrating for many homeowners. This button was designed to help users get their dishwasher started quickly, but it often doesn’t work as intended. 

The button is located on the front of the dishwasher near the upper right corner and is hard to see in dim light or when a person is bending over. GE has heard the complaints about the start button and is working to make it a little easier for consumers to use. 

The company has redesigned the dishwasher door lock so that when the door is opened, a light inside the door illuminates. It is designed to be used in conjunction with the new start button and will help people quickly see how to use the new button.

Why is the GE Dishwasher Start Button Not Working?

Since GE dishwashers are so popular, it’s not surprising that the button to start them up can be a bit of a problem. Sometimes, it just doesn’t seem to want to work. The dishwasher will start, but the button won’t work to stop it. There is usually a simple solution of restarting the machine in either case.

If the button doesn’t work, there is likely a problem with the safety interlock. The safety interlock is a switch that must be on to allow the dishwasher to start.  

Why Does the GE Dishwasher Start Button Not Working

When your GE dishwasher start button isn’t working, there may be a problem with the button or with the dishwasher’s wiring. 

If the button doesn’t work when you push it, there may be a problem with the switch that sends power to it. If the wiring is damaged, a technician can replace it. In some cases, though, simply cleaning and lubricating the switch may solve the problem. 

First, it’s essential to check to see if the power is being correctly turned on to the dishwasher. If the power is working, but the start button isn’t working, something may block the button from activating.

Another possibility is a broken wire somewhere in the dishwasher, so it may be necessary to have someone come out and fix it. GE Dishwasher Start Button Replacement

How to fix GE Dishwasher Start Button?

If your GE dishwasher start button is not working, there are a few things to try on.

Firstly, check to see if the button is physically broken. If it is not,then try replacing the dishwasher start button. 

Secondly, if the button is functional but doesn’t work with particular dishes or cycles, you may need to adjust the cycle settings. 

Lastly,  consider calling in a service technician if all else fails.


If your GE dishwasher start button doesn’t work, here are some troubleshooting tips to get it working again:

Try turning the dishwasher on, but don’t run it. If that doesn’t work, unplug the dishwasher and look for any water trapped between the start button and the door. 

If water is trapped, carefully remove it with a dry towel. Plug the dishwasher back in, and run it for at least 2 minutes. Then give the process another shot. 

 If the start button still doesn’t work, you may need to replace it.

Reset GE Dishwasher Start Button

When you first bought your GE dishwasher, you probably thought that the start button was one of those pesky little details that just worked. But over time, the button may have stopped working, and you may not be able to figure out how to fix it.

If you’re wondering why your dishwasher won’t stop or why it’s not working correctly, we’re here to help!

A dishwasher’s start button can sometimes become stuck or broken. If you find that your dishwasher is not starting, there are several steps that you can take to reset the dishwasher. 

If your GE dishwasher start button goes haywire, you may need to reset it. To do this, unplug the dishwasher and remove the front panel. Find the reset button on the control panel and press it. Replace the board and plug in the dishwasher.

Frequently Asked Questions

How do you fix a dishwasher that won’t fill up?

If your dishwasher doesn’t fill up, there are a few things you can try. First, check if the water is running. If it isn’t, make sure the valve is open, and the hose is plugged in properly. Next, check the drain pump filter. If it’s dirty, you’ll need to replace it. Finally, reset the dishwasher by turning off the power at the breaker and then back on.

Why is my GE dishwasher not working after the power cut?

There are a few possible explanations if you’re currently experiencing issues with your GE dishwasher not working. The first and most common is that there’s something blocking the water flow. 

This can be caused by anything from rocks or debris to foreign objects like toilet paper. If this is the case, you’ll need to remove whatever’s blocking the water flow and replace any broken parts. Another possible reason your dishwasher isn’t working is a power cut.

Related: 7 Reasons Why GE Dishwasher Not Draining at End of Cycle

Wrap Up 

If you fail to start the GE dishwasher, there may be a problem with the start button. If it is not working, you can test the button by turning on the dishwasher and pushing the start button. 

If it lights up but your Ge dishwasher button get stuck, you may need to replace the switch or button. Consider checking on the few facts that might cause an issue with the start button. If you fail to fix the risky points, go for professional help.

Leave a Comment

Your email address will not be published. Required fields are marked *